 |
 |
 |
 |
 |
 |
 |
| 245 Lewis Street Buffalo NY 14206 |
| 716-852-1954 |
| K A M I N S K I & S O N S T R U C K E Q U I P M E N T 245 LEWIS STREET BUFFALO NY 14206 7 1 6 - 8 5 2 - 1 9 5 4 |
| PICK UP EQUIPMENT - LADDER RACKS |
A new heavy series of pick-up truck racks are now available from System One. These
heavy duty racks belong to a group called I.T.S.™ Series racks. I.T.S.™ stands for
“Integrated Tie-Down System”. The gussets in the upper corners of these racks are
much larger and of extra heavy wall construction for supreme rigidity. Also incorporated
in their design is a special bore to accept our new Work Winch™ tie-down system. The
Work Winch™ is a convenient and efficient tie-down located within the upper gusset and
is an integral part of an I.T.S.™ rack. It is constructed of aluminum magnesium alloy and
stainless steel with a PVC bearing. It is the only rust-free tie down system made and has
a nearly unlimited lifespan. They are available separately or as part of a package in the
Heavy Work Contractor Rig.
heavy duty racks belong to a group called I.T.S.™ Series racks. I.T.S.™ stands for
“Integrated Tie-Down System”. The gussets in the upper corners of these racks are
much larger and of extra heavy wall construction for supreme rigidity. Also incorporated
in their design is a special bore to accept our new Work Winch™ tie-down system. The
Work Winch™ is a convenient and efficient tie-down located within the upper gusset and
is an integral part of an I.T.S.™ rack. It is constructed of aluminum magnesium alloy and
stainless steel with a PVC bearing. It is the only rust-free tie down system made and has
a nearly unlimited lifespan. They are available separately or as part of a package in the
Heavy Work Contractor Rig.
| Deluxe Commercial Unit Series Truck Caps by SYSTEM ONE |
Our UTILITY RIG™ is a highly versatile
and economical rack and is available in
both Standard and I.T.S.™ series. Its
extremely rigid free-standing trusses
have a 600 lb. capacity and allow easy
loading and unloading of equipment
and material. Furthermore, the rear
Truss is completely removable in
seconds for full unrestricted access to
the cargo area. The Utility Rig includes
Ladder Life® anti-wear inserts for
ladder protection, Ladder Glide® low
friction insert for easy loading and
unloading, side stops on all four upper
corners, and color inserts to match the
truck.
and economical rack and is available in
both Standard and I.T.S.™ series. Its
extremely rigid free-standing trusses
have a 600 lb. capacity and allow easy
loading and unloading of equipment
and material. Furthermore, the rear
Truss is completely removable in
seconds for full unrestricted access to
the cargo area. The Utility Rig includes
Ladder Life® anti-wear inserts for
ladder protection, Ladder Glide® low
friction insert for easy loading and
unloading, side stops on all four upper
corners, and color inserts to match the
truck.
Our CONTRACTOR RIG is the undisputed
leader among contractor ladder racks. Its
heavy-wall, large-profile, rust-free
aluminum extrusions provide a 1250 lb.
capacity in the Heavy Work I.T.S.™ series
Contractor Rig and a 1000 lb. capacity in
the Standard Contractor Rig. In addition to
delivering outstanding performance and
longevity in highabuse environments, its
ability to be configured to your own
particular needs means better versatility,
better organization, and ultimately better
efficiency for you and your company. The
Contractor Rig includes a removable rear
crossmember, with adjustable handles,
Ladder Life® anti-wear inserts on each
crossmember, Ladder Glide® low friction
insert on rear crossmember, and color
inserts to match the truck.
leader among contractor ladder racks. Its
heavy-wall, large-profile, rust-free
aluminum extrusions provide a 1250 lb.
capacity in the Heavy Work I.T.S.™ series
Contractor Rig and a 1000 lb. capacity in
the Standard Contractor Rig. In addition to
delivering outstanding performance and
longevity in highabuse environments, its
ability to be configured to your own
particular needs means better versatility,
better organization, and ultimately better
efficiency for you and your company. The
Contractor Rig includes a removable rear
crossmember, with adjustable handles,
Ladder Life® anti-wear inserts on each
crossmember, Ladder Glide® low friction
insert on rear crossmember, and color
inserts to match the truck.
installed on any I.T.S.™ series rack.
Everything you need is always right
there–even the handle. Just lift the
pawl and pull out as much strap as
you need. Throw the hook end of the
strap over the load and hook it to the
underside of the crossmember. Take
up the slack with the handwheel and
tighten with the handle. The handle
can be kept permanently on the shaft
or it can be left in a toolbox and used
only when needed. When hanging, it
allows the shaft to rotate within it;
when pushed forward, it will engage
and operate the winch.
Everything you need is always right
there–even the handle. Just lift the
pawl and pull out as much strap as
you need. Throw the hook end of the
strap over the load and hook it to the
underside of the crossmember. Take
up the slack with the handwheel and
tighten with the handle. The handle
can be kept permanently on the shaft
or it can be left in a toolbox and used
only when needed. When hanging, it
allows the shaft to rotate within it;
when pushed forward, it will engage
and operate the winch.
 |
 |
 |
 |
 |
 |
 |
 |
 |
System One® equipment
mounts to trucks with bed
liners, both overthe-rail
(shown) andunder-the-rail.
System One is not a “one
size fits all rack.” We build the
right rack for the truck
whether full size or mini,
standard or extended cab,
long or short bed.
mounts to trucks with bed
liners, both overthe-rail
(shown) andunder-the-rail.
System One is not a “one
size fits all rack.” We build the
right rack for the truck
whether full size or mini,
standard or extended cab,
long or short bed.
Our Utility Rig® is particularly suited for
trucks with a sport/utility function. It
retains the important features needed
by contractors, yet it can be broken
down in seconds and the trusses can be
placed in the bed of the truck or hung
on a garage wall. The Pick-Up Traks®
remain on the truck and serve as a
cargo restraint system and bed rail
protector.
trucks with a sport/utility function. It
retains the important features needed
by contractors, yet it can be broken
down in seconds and the trusses can be
placed in the bed of the truck or hung
on a garage wall. The Pick-Up Traks®
remain on the truck and serve as a
cargo restraint system and bed rail
protector.
System One's Contractor Rig is the most
practical and versatile rack made. The rear
cross member is easily removed allowing
large items to be loaded with ease. The rack
itself can also be removed in minutes by
removing four stainless steel bolts and
simply lifting the rack off the Pick-Up Traks
practical and versatile rack made. The rear
cross member is easily removed allowing
large items to be loaded with ease. The rack
itself can also be removed in minutes by
removing four stainless steel bolts and
simply lifting the rack off the Pick-Up Traks
Box Hangers, eliminating the need to
install support legs underneath. This
install support legs underneath. This tool
leaves a large, clear, unobstructed cargo
leaves a large, clear, unobstructed cargo
area and makes loading of 4ft. wide
optional extra-length Pick-Up Traks.
material easy. Trucks with 8ft. beds allow
tool boxes up to 88” to be installed; 90”
tool boxes are accommodated with
optional extra-length Pick-Up Traks.
optional extra-length Pick-Up Traks.
install support legs underneath. This
install support legs underneath. This tool
leaves a large, clear, unobstructed cargo
leaves a large, clear, unobstructed cargo
area and makes loading of 4ft. wide
optional extra-length Pick-Up Traks.
material easy. Trucks with 8ft. beds allow
tool boxes up to 88” to be installed; 90”
tool boxes are accommodated with
optional extra-length Pick-Up Traks.
optional extra-length Pick-Up Traks.
others can be cut to order. The stainless
others can be cut to order. The stainless
Pick-Up Trak, instead of to the thin sheet
metal of the bed rail. This mounting
method distributes the weight evenly on
the bed rail resulting in an extremely rigid
installation.installation.
others can be cut to order. The stainless
Pick-Up Trak, instead of to the thin sheet
metal of the bed rail. This mounting
method distributes the weight evenly on
the bed rail resulting in an extremely rigid
installation.installation.
PICK UP MENU
